Step-By-Step Guide On How To Change A Car Tyre

change a car tyre

Changing a tyre is more straightforward than many people believe. It also does not require the strength of a bodybuilder to do the task (unless you are driving a large truck). This is a taught talent that anybody can master. Here’s a step-by-step instruction for changing your car’s tires with minimal fuss:

How Do You Change A Car Tire?

Specific equipment comes with the automobile, but others, such as those that make changing a tyre a breeze, should be included in the toolbox. To replace the tyre easily, you must purchase such items ahead of time. Here are all of the tools you’ll need to get the task done quickly:

To Change A Car Tire, You’ll Need the following:

  • Owner’s Manual for a Car: Every car’s owner manual has important parameters while replacing a tire. Small but vital data, such as the wrench that will fit your car’s nuts and bolts, may be found here.
  • Lug Wrench: There are several lug wrenches, such as double-sided or X-shaped, nut socket or L-shaped, and so on. These are used to loosen and then tighten the wheel’s lug nuts.
  • Spare Tyre: Used to replace a flat tyre.
  • A jack raises the car a few inches so the tire can be readily replaced. There are several varieties of jacks available on the market nowadays. A jack is usually included in the car.

Items that do not come with your vehicle yet are valuable while changing a flat tyre include:

  • A functioning flashlight is helpful while working at night or in low-light situations.
  • 2 Small Flat Wooden Boards: Add flat wooden pieces measuring roughly 26 inches. These will be useful for holding the jack in place.
  • Gloves: Protect your hands from wounds, keep mud from the tires at bay, and improve grip.
  • Wheel Wedges: Use these to keep other wheels in place while you work on the flat tyre.
  • Raincoat: Will come in handy when it rains.

Buy – > Car Tyre Changer

Steps To Change Car Tyre:

Step 1: Look For A Safe Place To Change Your Car Tire

You must get off the road safely when you notice that your automobile has a flat tire. First, do not swerve unexpectedly, as this is risky for you and other cars on the road. Next, find a safe place to park your car, get out, and change the tire. Remember to provide enough safe distance between the vehicle and the road when parking.

Step 2: Turn On the Parking Lights

You are notifying other drivers by turning on the parking or danger lights. They will see the blinking lights from a distance, and you can securely change the tyre.

Step 3: Park Using The Hand-break

Pull the hand-break to its highest position to park the automobile. This ensures that the car remains stationary while you apply force to change the tyre.

Step 4: Install the Wheel Wedges

To increase safety, secure the wheel wedges behind the good tyres. These are handy, particularly on an uphill.

Step 5: Take off the wheel covers.

Wheel covers cover the majority of automobile tyres. These must be removed before you may fix the flat tyre. Refer to the owner’s handbook for instructions on how to accomplish this. It should be noted that different automobile models may have different wheel cover settings.

Step 6: Half-Loosen The Lug Nuts

The lug nuts should only be loosened halfway before using a jack to elevate the automobile because if you move the car first, the tyre will continue to rotate. Loosen the lug nuts with the lug wrench. Make sure you’re using the right-sized wrench side.

Step 7: Use wooden boards to secure the jack.

Locate the jacking point beneath your vehicle. This is where the jack should be attached to the car. Keep the jack on the wooden planks you’ve placed under the jacking point. Connect the jack to the jacking point and raise the vehicle until there is a little space between the ground and the tyre.

Step 8: Completely remove the lug nuts

Please remove the lug nuts by completely unscrewing them using a tool.

Step 9: Change the flat tyre

Replace the flat tyre with a spare tyre and remove it from the frame.

Step 10: Tighten the lug nuts and replace the wheel cover.

This is the final step in repairing a flat tyre. Lower the car by screwing the lug nuts halfway. Remove the jack and wooden planks after the tyre has made firm contact with the ground. Replace the wheel cover and tighten the lug nuts.

Keep all the tools in the car and start driving after checking the tire pressure. If you don’t have a device, take your vehicle to the local garage and get the tires examined. The flat tire should be fixed as quickly as feasible as well.